The HOCL-6 90 degree angle clip is designed to accommodate 3/8″ threaded rod. This clip is recommended for indoor applications.
Products
90 Degree Angle Clip – 316 Stainless Steel
The Stainless Steel HOCL-1SS Angle Clip is 0.75” wide and has a 1.25” leg with a 0.22” hole that will accommodate a standard drywall screw. The other leg is 1” with a 0.37” hole that will accommodate 1/4″ x 20 threaded rod. The thickness of this clip is 14 gauge.
3″ I-LAG™ Eye Lag Screw – 316 Stainless Steel – 100 Pack
The W300CSS 316 Stainless Steel I-LAG™ screw (eye lag screw) is designed to fasten ceiling wire or jack chain to wood surfaces to facilitate the installation of drop ceilings in corrosive or marine environments. The W300CSS is an excellent choice for MRI room applications due to it’s austenitic, non-magnetic properties. Chlorinated environments have been observed… Continue reading 3″ I-LAG™ Eye Lag Screw – 316 Stainless Steel – 100 Pack
2 1/4″ Deep Drilling I-LAG™ Eye Lag Screw – Thousand Pack
The New ELDXM – Deep Drilling Eye Lag Screw is designed to go into structural steel up to 1/4″ thick, NOT FOR USE IN SHEET METAL THINNER THAN 12 GAUGE (0.1094″). The ELDXM has a blue Ruspert® finish with an extra wide drill tip. It can drill into 1/8″ steel in less than 5 seconds,… Continue reading 2 1/4″ Deep Drilling I-LAG™ Eye Lag Screw – Thousand Pack
1-5/8″ I-LAG™ Eye Lag Screw – 316 Stainless Steel – Hundred Pack
The W1625CSS 316 Stainless Steel I-LAG™ screw (eye lag screw) is designed to fasten ceiling wire or braided aircraft cable to wood surfaces. Suitable for installation in corrosive or marine environments. The W1625CSS is an excellent choice for installing bird repellent wire or netting. Chlorinated environments have been observed to cause stress corrosion cracks in… Continue reading 1-5/8″ I-LAG™ Eye Lag Screw – 316 Stainless Steel – Hundred Pack
1-5/8″ I-LAG™ Eye Lag Screw – 316 Stainless Steel – Five Hundred Pack
The W1625DSS 316 Stainless Steel I-LAG™ screw (eye lag screw) is designed to fasten ceiling wire or braided aircraft cable to wood surfaces. Suitable for installation in corrosive or marine environments. The W1625DSS is an excellent choice for installing bird repellent wire or netting. Chlorinated environments have been observed to cause stress corrosion cracks… Continue reading 1-5/8″ I-LAG™ Eye Lag Screw – 316 Stainless Steel – Five Hundred Pack
HPHRL Mounting Rails
Custom designed rail mount for JH and HPH J Hooks with ¼”-20 threaded impressions. Small size fits HPH48, HPH64 and JH64 as well as ¼”-20 threaded bridle rings. Please see cut sheet for dimensional information. Custom lengths available, flat rate charge per cut will be applied.
HPHRS Mounting Rails
Custom designed rail mount for JH and HPH J Hooks with ¼”-20 threaded impressions. Small size fits HPH16, HPH32, JH21 and JH32 as well as ¼”-20 threaded bridle rings. Please see cut sheet for dimensional information. Custom lengths available, flat rate charge per cut will be applied.
HPHTL Mounting Rails
Custom designed rail mount for JH and HPH J Hooks. Large size fits HPH48, HPH64 and JH64. Please see cut sheet for dimensional information. Custom lengths available, flat rate charge per cut will be applied.
HPHTS Mounting Rails
Custom designed rail mount for JH and HPH J Hooks. Small size fits HPH16, HPH32, JH21 and JH32. Please see cut sheet for dimensional information. Custom lengths available, flat rate charge per cut will be applied.