Home Extension Poles Powder Actuated Poles Telescoping Aluminum Viper Pole

Extension Poles Powder Actuated Poles

Telescoping Aluminum Viper Pole

Product Code: VLM-6 - VLM-12

The Telescoping Aluminum Viper Pole is an extension tool designed to be used with Ramset® Viper 3 or Powers® Sniper™ powder actuated tools.

It is capable of adjusting to almost any length necessary to get the job done. Aircraft grade aluminum is used in the construction of the tool. Which offers not only lightweight characteristics, but also years of hard use.

Note: Telescoping Aluminum Viper Pole will not work with the Ramset® Viper 4 powder actuated tool.

Product Code	Collapsed Length	Extended Length	Weight
VLM-6	3′ 3.25″	5′ 3.5″	3.1 lbs.
VLMG-12	4′ 3″	10′ 6″	4.5 lbs.
VLM-12	6′ 3″	11′ 5.5″	4.7 lbs.
VLM-18	6′ 4″	16′ 9.75″	6.2 lbs.
VLM-24	8′ 4″	23′ 0.5″	7.85 lbs.

Where to buy? Submittal Request

Specs

Documentation

View Cut Sheet

Ready to Order?

Find a distributor near you, or request a submittal package for this product.

Where to buy? Submittal Request

Questions

Frequently Asked Questions

General

What are powder-actuated pole tools used for?

They let you fire powder-actuated fasteners from the ground instead of using ladders or lifts. This improves safety and speed when fastening to concrete, steel, or overhead structures.

How do these poles extend the reach of a powder-actuated tool?

They hold the tool at the end of a rigid fiberglass or aluminum pole, allowing you to operate it at height. This setup lets you stand safely on the floor while the fastener is installed overhead.

Are powder-actuated poles compatible with multiple tool brands?

Yes. Different pole models are built for specific powder-actuated tools. The available poles cover a wide range of brands, including Hilti and Ramset systems. Always match the pole series to the tool it supports.

What lengths do these poles come in?

The powder-actuated poles shown come in fixed and telescoping versions, typically ranging from 4 feet up to 12 feet, depending on the model.

Compatibility and Features

How do I know which pole fits my powder-actuated tool?

Each pole is designed for a defined list of compatible tools. The LongShooter Series, V-Series, and VLM-Series each match different powder-actuated systems. Check your tool model and select the pole designed for it.

What materials are these poles made from?

They use fiberglass or aircraft-grade aluminum, depending on the series. Both materials keep the pole lightweight, strong, and safe for overhead work.

Do the poles meet safety requirements?

Yes. They use dielectric or OSHA-compliant materials where required. The construction supports safe operation in electrical and overhead environments.

Do telescoping versions lock securely?

The telescoping models use secure locking mechanisms to hold the pole at the selected working length without wobble.

Are fixed poles still used?

Yes. Fixed-length poles are preferred when a consistent reach is needed or when simplicity and lighter weight are more important than adjustability.

Practical Use on the Jobsite

Do powder-actuated poles reduce fatigue?

Yes. By removing the need to lift a heavy tool overhead, the poles reduce strain on the arms, shoulders, and back.

Are they suitable for tight or restricted spaces?

Some models are slim enough to use around pipes, gridwork, and narrow jobsite areas where a lift or ladder won’t fit.

Can these poles improve installation speed?

Yes. Workers remain on the ground, can reposition quickly, and avoid constant climbing, which speeds up repetitive fastening tasks.

Do I need training to use a powder-actuated pole tool?

Operators should follow all manufacturer requirements for powder-actuated tools, including certification where required by local regulations. The pole itself does not change those requirements.

Maintenance and Longevity

How should I maintain a powder-actuated pole?

Wipe it down after use, check for damage to the pole body, and ensure locking mechanisms and attachment points stay clean and functional.

Do these poles require lubrication?

Only the tool itself may require lubrication. You should use the poles dry. Avoid adding oil unless the manufacturer gives specific instructions to do so.

What’s the expected lifespan?

With normal use, fiberglass and aluminum poles hold up well for long-term jobsite work. Avoid impacts, crush damage, or overloading to extend service life.

Purchasing and Availability

Where is Doc’s Industries based?

Doc’s Industries is based in Simi Valley, CA. Our team is dedicated to providing quality products and above and beyond service to customers globally.

Are the powder-actuated poles available for immediate purchase?

Stock is maintained regularly. Lead times vary; contact the Doc’s sales team or check with an authorised distributor.

Do you supply to wholesale and retail customers?

Doc’s Industries services wholesale accounts. Please use the “where to buy” function on our website to be connected to the nearest distributor.