At Docs Industries, we know that dependable tools are only as reliable as the parts that keep them running. Our Lagmaster® Parts give structural engineers and contractors the essential components needed to maintain, repair, and extend the service life of your Lagmaster® systems. Trust our solutions to keep your crews productive and your equipment performing at its best.
The LMP Retro Kit converts a standard Lagmaster® pole tool to a Lagmaster® Plus. The Lagmaster® Plus is the ultimate all-in-one pole tool. Specifically designed for use in the Acoustical Ceiling, Data Comm, Fire Sprinkler, HVAC and Electrical Industries. Built to withstand the rigors of daily use on the job site. The Lagmaster® Plus features… Continue reading Lagmaster® Plus Retro Kit
The LMP Viper Plug is a threaded adapter that allows you to attach a Viper 2, Viper 3 or Powers Sniper to the end of your Lagmaster Plus pole tool.
The open ended LMP 5/8 Plug is designed to install preassembled threaded rod using ITW’s Speedy fastener.
Vertigo tool extension to the Lagmaster® Plus extension pole.
Base extension to the Lagmaster® Plus extension pole.
Broom tool extension to the Lagmaster® Plus extension pole.
The LMP Keyless Chuck converts your Lagmaster® Plus Pole Tool into a ChuckExtender Pole Tool. Attach a drill bit, hole saw or nut driver with a quick twist of the keyless chuck.
LMP Pre-wrap extension to the Lagmaster® Plus extension pole.
Lagmaster Plus 1/4″ Hex Plug-in – Accepts all standard 1/4″ hex drivers
Wire Plug extension to the Lagmaster® Plus extension pole.
Lagmaster® Plus ½” Square Plug – 1/2″ male socket adapter – Accepts standard 1/2″ sockets.
Lagmaster® Plus 3/8” Plug – Open ended 3/8″ hex socket – Installs Elco screws pre-attached to 1/4″ or 3/8″ threaded rod
Lagmaster® Plus 9/16″ Plug – Open ended 9/16″ hex socket – For setting 3/8″ wedge anchors or concrete screws.
Lagmaster® Plus ½” National Pipe Thread Plug – Threaded adapter for Doc’s® HOIT-AL joist clip installation tool.
Lagmaster® Plus Purlin Plug – Hangs & wraps 12GA ceiling wire to “C” & “Z” Purlin/Joist clips.
Lagmaster® Plus Wire Plug – Welded version – Hangs & wraps 12GA ceiling wire attached to an I-LAG™ screw.
Wire bale pin for the Lagmaster extension pole.
Lagmaster® Viper Head – Threaded adapter for Viper 2, Viper 3 and Power’s Sniper.
Lagmaster® Driver – Small, replacement part for the Triple Lagmaster® extension pole. This is the bottom piece of the pole that that fits into the chuck of a power drill. Includes four screws. The large version fits three stage poles (LMG-12, LM-18, LM-24, LMGAP-12, LMAP-18, LMAP-24, LMGP-12, LMP-18, LMP-24).
Lagmaster® Head – Set Screw Version – Hangs & wraps 12GA ceiling wire, jack chain or braided wire attached to an I-LAG™ screw
1/4-28 x 3/8 Button Head Screws for LM & LMP Pole Tools – bag of four.
Lagmaster® Pre-Wrap Head (milled) – Installs I-LAG™ screws pre-tied to 12GA ceiling wire.
Lagmaster® Driver – Large, replacement part for the Triple Lagmaster® extension pole. This is the bottom piece of the pole that that fits into the chuck of a power drill. Includes four screws. The large version fits three stage poles (LMG-12, LM-18, LM-24, LMGAP-12, LMAP-18, LMAP-24, LMGP-12, LMP-18, LMP-24).
Lagmaster® Head – Welded version – Hangs & wraps 12GA ceiling wire attached to an I-LAG™ screw.
Replacement stud for Lagmaster Driver with hardware.
Our Lagmaster® Parts are built for structural engineers and contractors who need dependable replacement components to keep fastening systems working at full capacity. At Docs Industries, we offer Lagmaster® parts that support compatibility, durability, and easier maintenance, helping crews stay productive and reduce costly interruptions in the field.
Why Lagmaster® Parts Matter
When an overhead fastening system is out of service because of a worn or damaged component, the impact reaches far beyond a single tool. It can slow schedules, create avoidable labor loss, and affect installation consistency across the jobsite.
Our Lagmaster® Parts exist to solve that problem. We make it easier for you to maintain your existing Lagmaster® equipment with the right replacement components, so your crews can protect uptime, preserve performance, and keep work moving with confidence.
Our Lagmaster® Parts include the essential components contractors and engineers expect when supporting active fastening systems.
We are focused on keeping your Lagmaster® systems operational. It is not meant to replace complete pole systems, but to support the continued serviceability of the equipment you already rely on.
In structural and industrial settings, replacement parts need to do more than simply fit. They need to perform under repeated use, demanding conditions, and active jobsite pressure. Our Lagmaster® Parts are selected to support the same practical expectations contractors and engineers bring to the rest of their equipment.
Durable parts help maintain system reliability over time. They also reduce the frequency of replacements, which can improve maintenance planning and lower the disruption that comes from unexpected wear.
Compatibility is one of the most important factors when choosing replacement parts. Crews do not have time to sort through parts that may or may not fit in the field. Engineers also need confidence that maintenance decisions will support the intended use of the equipment.
Our Lagmaster® Parts are designed to support proper fit and function within the Lagmaster® system. This helps simplify selection, improve maintenance efficiency, and reduce the risk of mismatched components affecting performance.
Downtime can be expensive, especially when fastening work is tied to larger schedule milestones. A missing or worn part can delay daily production, limit crew efficiency, and create unnecessary project friction.
By giving contractors access to core replacement components, our Lagmaster® Parts helps reduce those delays. Faster access to the right part means your equipment can return to service sooner, allowing crews to maintain momentum and stay focused on installation.
Maintenance should be practical, not complicated. Our Lagmaster® Parts support a more straightforward approach to upkeep by making common replacement items easier to identify and source.
For field teams, that means less guesswork and a smoother maintenance process. For project managers and purchasing teams, it supports better planning and a more organized approach to equipment readiness.
Choosing the right Lagmaster® parts starts with the application and the condition of the existing system. The goal is not just to replace a worn item, but to restore dependable function and support continued field performance.
Start by confirming the part matches the specific Lagmaster® system or component in use. This is the most important step because even a durable part will not perform well if it is not designed for the correct assembly or connection point.
Choose this approach if your priority is avoiding fit issues, installation delays, or performance problems tied to mismatched parts.
Some parts are replaced because they see repeated contact, stress, or movement during normal operation. Tips, collars, and adapters often fall into this category depending on jobsite use and maintenance cycles.
Choose based on wear point if your main goal is preventative maintenance and extending the working life of the larger system.
On high use jobsites, maintenance needs often appear sooner simply because equipment is used more often and under greater load. In those cases, it makes sense to keep common Lagmaster® parts available to support faster service.
Choose this approach if your crews rely on Lagmaster® systems daily and cannot afford avoidable downtime during active work.
Industrial and structural environments can place extra strain on fastening equipment. Repetitive overhead use, dust, impact, and constant transport all contribute to wear over time.
Choose replacement parts with the operating environment in mind if your systems are used in demanding commercial, industrial, or steel construction settings.
At Docs Industries, we understand that structural engineers and contractors work in environments where quality and consistency matter. Replacement parts are not minor accessories when they affect the function of tools used in overhead and structural applications. They are part of maintaining safe, dependable, and efficient jobsite performance.
Our Lagmaster® Parts are intended for professional use and supports the quality expectations of commercial and industrial work. That includes a focus on dependable fit, practical durability, and maintenance support for active field conditions. While project requirements and site standards vary, we encourage customers to match each replacement part to the intended equipment, operating conditions, and internal maintenance procedures.
For engineers, this supports better specification and service planning. For contractors, it supports a more reliable path to keeping equipment in operation without unnecessary trial and error.
Lagmaster® parts serve an important role across a range of structural and industrial environments where fastening systems are used regularly and equipment uptime matters.
In structural steel work, fastening tools are often used repeatedly under demanding conditions. Replacement parts help crews maintain system performance and avoid delays tied to worn components.
Metal building projects rely on steady installation progress. Our Lagmaster® Parts help support maintenance needs so fastening systems can stay in service throughout repetitive overhead work.
On commercial jobsites, schedule control often depends on keeping equipment ready for daily use. Having access to the right parts helps reduce stoppages and supports smoother crew operations.
Maintenance teams working in plants, warehouses, and active facilities need serviceable equipment they can trust. Replacement components help extend tool life and keep systems ready for ongoing work.
Retrofit environments often call for dependable fastening equipment in spaces where access and timing are tight. Keeping Lagmaster® systems maintained with the right parts helps crews work more efficiently when project windows are limited.
Lagmaster® Parts are used to maintain, repair, and support existing Lagmaster® systems. They help replace worn or missing components so crews can keep equipment functioning properly in overhead and structural applications.
Start by identifying the specific component that needs replacement and confirming compatibility with your existing Lagmaster® equipment. The best choice is the one that restores proper fit, function, and reliability for your system.
Compatibility affects fit, performance, and maintenance efficiency. Using the correct Lagmaster® part helps reduce installation issues, prevents unnecessary downtime, and supports more dependable operation in the field.
Yes. Keeping common service parts available can shorten repair time and return equipment to use faster. This is especially valuable on active jobsites where delays can affect labor productivity and scheduling.
Our Lagmaster® Parts are most relevant for structural engineers, contractors, maintenance teams, and purchasing managers who need to support existing equipment used in commercial and industrial environments.
Our Lagmaster® Parts are built to help you protect equipment performance, simplify maintenance, and reduce downtime where it matters most. Explore the available parts from Docs Industries to find the right components for keeping your Lagmaster® systems ready for the work ahead.
The table below gives a general overview of the types of Lagmaster® components that we provide. It is intended to help engineers, contractors, and purchasing teams understand the role each part type plays, as simply as possible.
| Part Type | General Purpose | Key Benefit | Best Fit For |
|---|---|---|---|
| Replacement Tips | Restore functional contact points on worn systems | Helps maintain consistent operation and usability | High use equipment with visible wear at working ends |
| Adapters | Support proper connection between compatible components | Improves fit and system continuity | Crews maintaining or reconfiguring existing Lagmaster® setups |
| Collars | Help secure positioning and support assembly stability | Promotes dependable alignment and retention | Systems that need stable component placement during use |
| Fasteners and Hardware | Replace service hardware lost or worn over time | Supports reliable upkeep and quicker repairs | Routine maintenance kits and field service needs |
| Service Components | Cover general wear items used in ongoing maintenance | Helps reduce downtime and extend equipment life | Contractors managing active fleets of Lagmaster® tools |
