Doc’s Industries manufactures a full line of professional grade extension poles for multiple contractor trades. Our pole tools allow you to do the job safely from the ground, saving you time and money. We’ve been manufacturing well known brands such as the Lagmaster lag pole and the LongShooter pole tool for powder actuated tools since the mid 1980’s. If you need an extension pole, chances are we make it.
The patented Overhead Drill Machine – Generation 2 is the ultimate all-in-one extension tool for overhead drilling applications. The universal saddle fits most “D” handle, “L” shaped, Pistol grip and Cordless rotary hammer drills. The ODM G2 is the most efficient and effective tool of its kind. Use it to install wedge anchors, tie wire… Continue reading Overhead Drill Machine
Use the SDS PLUS I-Wedge Installation Tool to install I-Pins, Eye-Wedge Anchors and Powers’ Tie-Wire Spike Anchors using the “hammer only” feature of an SDS Plus hammer drill. Attaches to any SDS Plus Hammer Drill Weighs .40 lbs.
The TorqueExtender™ is a socket wrench extension pole. It allows you to torque down multiple sized fasteners to ceilings safely and easily from the ground. Installs 3/8″ wedge anchors, concrete screws and drop-in anchors with ease. Use what the inspectors use! Standard 1/2” male square socket drive with detent ball Standard 1/2” female square socket… Continue reading TorqueExtender
Overhead drilling and anchoring can slow down a job fast when crews are forced into awkward positions, repeated ladder moves, or unstable overhead tool handling. For structural engineers, the concern is installation quality and anchor performance. For contractors, it is productivity, safety, and keeping work moving without sacrificing precision.
At Docs Industries, our Extension Poles & Tools are built around practical solutions for overhead access challenges. Our Overhead Drill Machine G2, I-Wedge Tool, and TorqueExtender help crews drill, install, and torque overhead anchors with better control from safer working positions.
These tools support commercial construction, structural anchoring, MEP installation, and retrofit work where overhead fastening must be accurate, repeatable, and compliant with professional job site expectations.
Overhead work creates a unique set of job site demands. Crews must apply upward force, maintain alignment, manage tool weight, and work around ceiling height, slabs, beams, and installed systems. Even skilled installers can lose efficiency when the process depends on ladders, lifts, or repeated repositioning.
Our overhead drilling and anchoring tools are designed to reduce those pain points.
The category includes:
Each tool serves a different part of the overhead installation process, but the goal is the same: help crews complete overhead work with more stability, better reach, and more consistent results.
For engineers, that means greater confidence in the installation method. For contractors, it means less time lost to difficult access and more reliable field execution.
Overhead drilling and anchoring tools must support real job site forces. The issue is not only the weight of the tool. It is also the pressure applied during drilling, the impact force from hammer action, and the torque required to secure fasteners properly.
Our tools are designed to help manage those forces in a controlled way.
The Overhead Drill Machine G2 supports common rotary hammer drill configurations through a universal saddle designed for most D handle, L shaped, pistol grip, and cordless rotary hammer drills. This gives crews a practical way to apply drilling force from below while maintaining better control over the tool position.
The TorqueExtender helps crews torque overhead fasteners from the ground. It is especially useful when tightening wedge anchors, concrete screws, and drop in anchors in overhead conditions. By extending reach while preserving torque transfer, it helps installers complete fastening work without relying on unstable body positioning.
The I-Wedge Tool supports impact driven installation using the hammer only function of an SDS Plus hammer drill. It gives crews a direct installation method for compatible overhead anchors without adding unnecessary complexity.
Anchor performance depends on more than the anchor itself. Hole alignment, drill control, installation depth, and fastening method all affect the final result. Poor overhead access can lead to angled holes, inconsistent anchor seating, or uneven torque.
Our Extension Poles & Tools help improve precision by giving installers better control over the work.
The Overhead Drill Machine G2 allows drilling from the floor while keeping the drill positioned for overhead work. This reduces fatigue and helps crews maintain a cleaner working angle during repeated installations.
The I-Wedge Tool supports direct anchor installation for I-Pins, Eye-Wedge Anchors, and Powers’ Tie-Wire Spike Anchors. That matters in applications where suspended systems depend on consistent fastening points across a ceiling or slab.
The TorqueExtender supports accurate tightening by giving crews a more controlled way to reach overhead fasteners. Instead of climbing, adjusting, and reaching above shoulder height, installers can focus on proper torque application from a safer stance.
Precision is not only an engineering concern. It also protects the schedule. Fewer installation errors mean fewer corrections, fewer inspections issues, and less rework.
Repetition is one of the biggest challenges in overhead anchoring. A single overhead anchor may be simple. Hundreds of overhead anchors across a commercial floor plate can create fatigue, inconsistency, and safety exposure.
Our tools are designed to support repeated use in professional construction environments.
Stable handling helps crews keep the work moving without losing control. It also reduces strain during long installation cycles. When installers can work from the ground or a more natural position, they can maintain better consistency over time.
This is especially important in large commercial, industrial, and MEP projects where overhead anchoring is not a one time task. It is part of the daily workflow.
Safety and compliance are central to overhead drilling and anchoring. Contractors need tools that support job site safety practices, while engineers need confidence that installation methods align with project requirements.
Our tools help reduce common overhead work risks, including:
By allowing more work to be completed from the ground or from improved working positions, our tools support safer workflows. They do not replace required job site safety procedures, but they help crews work within those procedures more efficiently.
Inspectors care about more than whether an anchor is present. They also look for proper installation, secure fastening, and consistency with project specifications. Tools that improve control can help crews produce cleaner, more reliable installations.
The TorqueExtender is especially useful where overhead fasteners must be tightened properly. The ability to torque from the ground can help reduce shortcuts caused by hard to reach locations.
The Overhead Drill Machine G2 supports more controlled overhead drilling, which can help improve hole quality and anchor placement. The I-Wedge Tool supports direct installation for specified anchor types using compatible SDS Plus hammer drills.
Commercial buildings often require extensive overhead anchoring for ceilings, utilities, supports, fixtures, and equipment. These installations may span parking structures, office buildings, retail spaces, healthcare facilities, schools, and mixed use developments.
Our Overhead Drill Machine G2 helps crews drill overhead anchor points more efficiently across large areas. The I-Wedge Tool supports fast installation of tie wire style anchors. The TorqueExtender helps crews tighten overhead fasteners without repeated ladder movement.
For contractors, this can mean faster production. For engineers, it supports more consistent execution across many anchor points.
Structural anchoring demands accuracy. Whether crews are installing wedge anchors, concrete screws, drop in anchors, or overhead fastening points, the installation method must support the design intent.
Our tools help improve control during key stages of the process:
The Overhead Drill Machine G2 gives crews a controlled method for overhead drilling. The TorqueExtender supports overhead torque work where proper fastening matters. Together, they help improve the quality of structural and support related installations.
Mechanical, electrical, and plumbing contractors often complete high volume overhead fastening. Hangers, conduit, duct supports, pipe supports, cable trays, and suspended assemblies all depend on reliable anchoring.
The I-Wedge Tool is a strong fit for tie wire anchor installation where speed and repeatability matter. The Overhead Drill Machine G2 supports drilling in overhead concrete and similar applications. The TorqueExtender helps secure overhead fasteners once anchors are placed.
MEP teams benefit from tools that reduce repositioning and help maintain a steady pace. When crews can install more anchors with less strain, the entire project sequence improves.
We design our overhead drilling and anchoring tools for the realities of field work. Crews need tools that are practical, durable, and easy to integrate into daily operations. Engineers need confidence that installation methods support performance, safety, and consistency.
Our Extension Poles & Tools category brings those priorities together.
The Overhead Drill Machine G2 helps solve overhead drilling access. The I-Wedge Tool supports efficient installation of compatible tie wire and wedge style anchors. The TorqueExtender helps crews tighten overhead fasteners from a safer and more controlled position.
Together, these tools help reduce fatigue, improve productivity, and support cleaner installation results.
Overhead drilling and anchoring demand more than reach. They require control, stability, precision, and safe access. Our Overhead Drill Machine G2, I-Wedge Tool, and TorqueExtender give contractors and engineers practical solutions for the most common overhead installation challenges.
At Docs Industries, we build tools that help crews work more efficiently while supporting the quality standards professional projects require. For commercial, structural, and MEP applications, our Extension Poles & Tools help turn difficult overhead work into a safer, more consistent, and more productive process.
