Home Suspended Ceiling Tools I-Wedge Tool I-Wedge Tool

Suspended Ceiling Tools I-Wedge Tool

I-Wedge Tool

Product Code: I-Wedge

Fits SDS Plus hammer drillsHammer-only modeFor I-Pins / eye-wedge anchors

Use the SDS PLUS I-Wedge Installation Tool to install I-Pins, Eye-Wedge Anchors and Powers’ Tie-Wire Spike Anchors using the “hammer only” feature of an SDS Plus hammer drill.

Attaches to any SDS Plus Hammer Drill
Weighs .40 lbs.

Where to buy? Submittal Request

Specs

1/4″ I-Pin Anchor Installation Instructions

Required tools and fasteners: ODM, ODM-250, ODM I-Wedge, ODM-IP

Step 1. Drill a 1/4″ hole in the concrete ceiling using an ODM (Overhead Drill Machine) and an ODM-250 1/4″ x 1.25” HALT BIT.

Step 2. Remove the ODM-250 HALT bit and insert an ODM I-Wedge SDS Plus installation tool into your hammer drill, set the hammer drill to hammer only.

Step 3. Insert a pre-tied ODM-IP 1/4″ I-Pin anchor into the slot of the ODM I-Wedge installation tool and hammer the anchor into the hole.

Step 4. Pull down to set the anchor.

Documentation

I-WEDGE Installation Tool Instructions

product videos

I WEDGE™ Tie-Wire Anchor Installation Tool

Ready to Order?

Find a distributor near you, or request a submittal package for this product.

Where to buy? Submittal Request

Questions

Frequently Asked Questions

General

What is an I-Wedge Tool?

An I-Wedge Tool is an SDS Plus hammer-drill accessory that drives eye-wedge anchors, I-Pins, and similar fasteners into concrete overhead. It channels the drill’s hammer-only action straight into the anchor so it seats cleanly and securely.

When do you use an I-Wedge Tool?

You use it for overhead anchoring jobs where you need to set pre-tied ceiling wire or tension-rated anchors inside concrete. It’s especially useful when installations must be completed from the ground using extension tools.

What anchors are compatible with an I-Wedge Tool?

It pairs with most I-Pins, eye-wedge anchors, and tie-wire spike-style anchors that require a hammer-only installation step.

What type of drill does the I-Wedge Tool fit?

The tool connects to SDS Plus rotary hammer drills. These drills must be set to hammer-only mode during installation.

Product Features and Specifications

How does the I-Wedge Tool work?

You load a pre-tied or loose anchor into the tool’s slotted opening. When the drill activates, the hammer action seats the anchor into the hole created by the matching SDS bit.

Why use an I-Wedge Tool instead of installing by hand?

It eliminates the strain and ladder use associated with overhead fastening. The tool delivers consistent hammering force, which reduces installation time and improves anchor seating accuracy.

Does the tool support pre-tied ceiling wire?

Yes. You can insert anchors already attached to the ceiling wire, which keeps the workflow fast and avoids handling loose components overhead.

How durable is the I-Wedge Tool?

The tool is built from heavy-duty steel and designed to withstand repeated hammer-only drilling cycles, even in dense concrete.

Installation and Usage

How do you install an anchor using the I-Wedge Tool?

1. Drill the appropriate hole size in the ceiling.

2. Insert the I-Wedge Tool into the SDS Plus drill.

3. Load the anchor into the tool’s slot.

4. Press the tool into the drilled hole while the drill runs in hammer-only mode.

5. Pull down slightly to set the anchor.

Do you need a specific SDS bit for the hole?

Yes. The hole must match the anchor size stated by the manufacturer. Matching the hole diameter and depth ensures the wedge seats properly.

Can the I-Wedge Tool be used with extension poles?

Yes. It can be attached to overhead drilling systems or pole tools designed for ground-based installation, improving safety by reducing ladder use.

Is the tool suitable for high-volume installation work?

Yes. Its design supports repetitive anchoring tasks, making it ideal for commercial ceiling wire, bracing, and mechanical support installations.

Safety and Best Practices

What drill setting should be used?

Always use hammer-only mode. Rotation is not required and can damage the tool or anchor.

How do you avoid anchor misalignment?

Hold steady upward pressure while driving the anchor. Misalignment usually comes from angling the tool instead of keeping it straight.

Do you need to wear PPE when using the I-Wedge Tool?

Yes. Wear safety glasses, hearing protection, and use proper dust control whenever you drill or drive anchors into concrete.

Purchase and Availability

Where is Doc’s Industries based?

Doc’s Industries is based in Simi Valley, CA. Our team is dedicated to providing quality products and above and beyond service to customers globally.

Is the I-Wedge Tool kept in stock?

It is stocked regularly. For current availability or estimated lead times, check with the Doc’s sales team or an authorized distributor.

Do you supply to wholesale and retail customers?

Doc’s Industries services wholesale accounts. Please use the “where to buy” function on our website to be connected to the nearest distributor.