T Bar Tools & Fasteners
Doc’s Industries manufactures tools and fasteners to make T Bar suspended ceiling installation faster and easier. We supply just about everything you need to aid in the installation of Donn, Certainteed and Armstrong ceiling tile and grid. Doc’s is home to well known brands such as Lagmaster lag poles and ICC listed I-Lag screws. Be sure to check out our new purpose-built AR-125 rivet tool, designed specifically for suspended ceiling installers.
read more
Shop Subcategories
75 products
1/8″ diameter, steel mandrel, black aluminum acoustical blind rivets with 1/4″ flange and 1/16″ – 1/8″ grip range. Sold in sturdy plastic bags. Package quantity is 10,000 pcs. UPC: 707129861061
The W300CSS 316 Stainless Steel I-LAG™ screw (eye lag screw) is designed to fasten ceiling wire or jack chain to wood surfaces to facilitate the installation of drop ceilings in corrosive or marine environments. The W300CSS is an excellent choice for MRI room applications due to it’s austenitic, non-magnetic properties. Chlorinated environments have been observed… Continue reading 3″ I-LAG™ Eye Lag Screw – 316 Stainless Steel – 100 Pack
The New ELDXM – Deep Drilling Eye Lag Screw is designed to go into structural steel up to 1/4″ thick, NOT FOR USE IN SHEET METAL THINNER THAN 12 GAUGE (0.1094″). The ELDXM has a blue Ruspert® finish with an extra wide drill tip. It can drill into 1/8″ steel in less than 5 seconds,… Continue reading 2 1/4″ Deep Drilling I-LAG™ Eye Lag Screw – Thousand Pack
The W1625CSS 316 Stainless Steel I-LAG™ screw (eye lag screw) is designed to fasten ceiling wire or braided aircraft cable to wood surfaces. Suitable for installation in corrosive or marine environments. The W1625CSS is an excellent choice for installing bird repellent wire or netting. Chlorinated environments have been observed to cause stress corrosion cracks in… Continue reading 1-5/8″ I-LAG™ Eye Lag Screw – 316 Stainless Steel – Hundred Pack
The W1625DSS 316 Stainless Steel I-LAG™ screw (eye lag screw) is designed to fasten ceiling wire or braided aircraft cable to wood surfaces. Suitable for installation in corrosive or marine environments. The W1625DSS is an excellent choice for installing bird repellent wire or netting. Chlorinated environments have been observed to cause stress corrosion cracks… Continue reading 1-5/8″ I-LAG™ Eye Lag Screw – 316 Stainless Steel – Five Hundred Pack
Use the I-Drill Driver SM to install specialty I-Lag® screws, Part #’s: W1625CSS & W1625DSS into wood surfaces with a power drill. Designed for use with chuck style drills, not impact drill or drivers.
The patented Overhead Drill Machine – Generation 2 is the ultimate all-in-one extension tool for overhead drilling applications. The universal saddle fits most “D” handle, “L” shaped, Pistol grip and Cordless rotary hammer drills. The ODM G2 is the most efficient and effective tool of its kind. Use it to install wedge anchors, tie wire… Continue reading Overhead Drill Machine
The I-Pin is a 1/4″ concrete expansion wedge anchor designed for use in suspended ceiling tension applications. It is an excellent choice when powder actuated pins are not practical. Such as fastening into very hard concrete with hard aggregate or in hospitals. A pre-drilled 1/4″ x 1 1/4″ hole is required for installation. Compare to:… Continue reading I-Pin – Tie Wire Anchor
Use the SDS PLUS I-Wedge Installation Tool to install I-Pins, Eye-Wedge Anchors and Powers’ Tie-Wire Spike Anchors using the “hammer only” feature of an SDS Plus hammer drill. Attaches to any SDS Plus Hammer Drill Weighs .40 lbs.
The TorqueExtender™ is a socket wrench extension pole. It allows you to torque down multiple sized fasteners to ceilings safely and easily from the ground. Installs 3/8″ wedge anchors, concrete screws and drop-in anchors with ease. Use what the inspectors use! Standard 1/2” male square socket drive with detent ball Standard 1/2” female square socket… Continue reading TorqueExtender
Use the I-Drill Driver to install I-Lag® screws into metal or wood surfaces with a power drill. Designed for use with Jacobs chuck style drills, not impact drills or drivers.
¼-20 x 4-1/4” Zinc Plated Acoustical Toggle Bolts Application: Acoustical Toggle Bolts are designed for indoor vertical tension applications only. The substrate strength will determine the allowable load. Instructions: Insert the Toggle Bolt through a ¾” hole in the substrate. The spring loaded wings will open once they are clear of the hole. Tighten the… Continue reading Toggle Bolts
The PurlinMaster™ is a multi-purpose pole tool used to install purlin clips and wrap ceiling wire all in one motion from the ground. The patented purlin head makes it possible to install a purlin clip and then wrap a ceiling wire onto the clip using the same tool. The PurlinMaster™ also includes an interchangeable head… Continue reading PurlinMaster™
The Hand Wire Twister allows you to quickly and easily pre-wrap ceiling wire to a fastener. Two holes on the base of the Hand Wire Twister allow you fasten it securely to a work bench.
The ChuckExtender is an aluminum extension pole with endless applications. Use it to drill holes into metal decking to install fasteners such as SAMMY® X-press or Powers® Vertigo™ Screws. Use it to drill into the floor to install Simpson Strong-Tie® Blue Bangers™. Hello back relief! Or use it as an extension for the application of… Continue reading ChuckExtender
4” Acoustical Ceiling Leveling Line Grid Clamp
Doc’s® I-PUNCH™ Acoustical punch pliers – Designed specifically for the acoustical industry to make 1/8″ holes for blind rivets. As with all Doc’s® industries tools and fasteners, these punch pliers go through strict quality control procedures so you can rest assured that they will stand up to the demands of professional contractors. Package Qty: 1pc… Continue reading I-Punch – 1/8″ Punch Pliers
Doc’s I-PUNCH plier repair kit- Designed specifically for Doc’s I-PUNCH pliers. As with all Doc’s Industries tools and fasteners, these punch plier repair kits go through strict quality control procedures so you can rest assured that they will stand up to the demands of professional contractors.
The LMP Retro Kit converts a standard Lagmaster® pole tool to a Lagmaster® Plus. The Lagmaster® Plus is the ultimate all-in-one pole tool. Specifically designed for use in the Acoustical Ceiling, Data Comm, Fire Sprinkler, HVAC and Electrical Industries. Built to withstand the rigors of daily use on the job site. The Lagmaster® Plus features… Continue reading Lagmaster® Plus Retro Kit
The Lagmaster® Plus is the ultimate all-in-one pole tool. Specifically designed for use in the Acoustical Ceiling, Data Comm, Fire Sprinkler, HVAC and Electrical Industries. Built to withstand the rigors of daily use on the job site. The Lagmaster® Plus features a unique all-in-one patented plug-in system which allows you to install multiple types of… Continue reading Lagmaster® Plus
1/8″ diameter, steel mandrel, black aluminum acoustical blind rivets with 1/4″ flange and 1/16″ – 1/8″ grip range. Sold in sturdy plastic bags. Package quantity is 1000. UPC: 707129861306
The W600CZP I-LAG™ screw (eye lag screw) is designed to fasten ceiling wire or jack chain to wood surfaces. Pair with a Lagmaster® Pole Tool to hang ceiling wire or jack chain quickly and safely from the ground. The W600CZP features RoHS Compliant Eco-friendly electroplated zinc finish free of oily residue. It is recommended for… Continue reading 6″ I-LAG™ Eye Lag Screw – Zinc Plated – Hundred Pack
The W500MZP I-LAG™ screw (eye lag screw) is designed to fasten ceiling wire or jack chain to wood surfaces. Pair with a Lagmaster® Pole Tool to hang ceiling wire or jack chain quickly and safely from the ground. The W500MZP is recommended for indoor applications only. Designed to be used in tension applications only.
The W500CZP I-LAG™ screw (eye lag screw) is designed to fasten ceiling wire or jack chain to wood surfaces. This is the 100-pack version of the W500MZP. Pair with a Lagmaster® Pole Tool to hang ceiling wire or jack chain quickly and safely from the ground. The W500CZP features RoHS Compliant Eco-friendly electroplated zinc finish… Continue reading 5″ I-LAG™ Eye Lag Screw – Zinc Plated – Hundred Pack
The W400CZP I-LAG™ screw (eye lag screw) is designed to fasten ceiling wire or jack chain to wood surfaces. This is the 100-pack version of the W400MZP. Pair with a Lagmaster® Pole Tool to hang ceiling wire or jack chain quickly and safely from the ground. The W400CZP features RoHS Compliant Eco-friendly electroplated zinc finish… Continue reading 4″ I-LAG™ Eye Lag Screw – Zinc Plated – Hundred Pack
The W400MZP I-LAG™ screw (eye lag screw) is designed to fasten ceiling wire or jack chain to wood surfaces. Pair with a Lagmaster® Pole Tool to hang ceiling wire or jack chain quickly and safely from the ground. The W400MZP is recommended for indoor applications only. Designed to be used in tension applications only.
The W300MZP I-LAG™ screw (eye lag screw) is designed to fasten ceiling wire or jack chain to wood surfaces. Pair with a Lagmaster® Pole Tool to hang ceiling wire or jack chain quickly and safely from the ground. The W300MZP features an electroplated zinc finish free of oily residue. It is recommended for indoor applications… Continue reading 3″ I-LAG™ Eye Lag Screw – Zinc Plated – Thousand Pack
The W300CZP I-LAG™ screw (eye lag screw) is designed to fasten ceiling wire or jack chain to wood surfaces. This is the 100 pack version of the W300MZP. Pair with a Lagmaster® Pole Tool to hang ceiling wire or jack chain quickly and safely from the ground. The W300CZP features an electroplated zinc finish free… Continue reading 3″ I-LAG™ Eye Lag Screw – Zinc Plated – Hundred Pack
The W300M I-LAG™ screw (eye lag screw) is designed to fasten ceiling wire or jack chain to wood surfaces. Pair with a Lagmaster® Pole Tool to hang ceiling wire or jack chain quickly and safely from the ground. The W300M is not a plated screw and therefore is recommended for indoor applications only. Click here… Continue reading 3″ I-LAG™ Eye Lag Screw – Thousand Pack
The Lagmaster® is the original Lag Pole. Trusted by acoustical ceiling contractors for over two decades. Use it to install I-Lag® screws and ceiling wire in one motion from the ground. Pair with any 3/8″ or 1/2″ drill. Product Code Collapsed Length Extended Length Stages Shipping Weight LM-6 3′ 5″ 5′ 5″ 2 3 lbs.… Continue reading Lagmaster® A+
Doc’s® AR-125 Acoustical Rivet tool is specifically designed to set 1/8” acoustical blind rivets. A unique feature of the AR-125 is its pre-load mechanism. The pre-load mechanism allows you to pre-load a blind rivet securely in the nozzle. This frees up the installer to get into position, secure the ceiling grid and quickly set the… Continue reading Acoustical Blind Rivet Tool
1/8″ diameter, steel mandrel, black aluminum acoustical blind rivets with 1/4″ flange and 1/16″ – 1/8″ grip range. Sold in sturdy plastic tubs. Package quantity is 500. UPC: 707129861047
The Lagmaster® is the original Lag Pole. Trusted by acoustical ceiling contractors for over two decades. Use it to install I-Lag® screws and ceiling wire in one motion from the ground. Pair with any 3/8″ or 1/2″ drill. Product Code Collapsed Length Extended Length Stages Shipping Weight LM-6 3′ 5″ 5′ 5″ 2 3 lbs.… Continue reading Lagmaster®
The 150 PPC is a punch point eye lag screw. It features a small drill point that tapers, making it suitable for both light and medium gauge sheet metal, specifically 20 gauge metal decking. The length from the point of the screw to the collar is about 1 1/2″, overall length is about 2 3/4″.… Continue reading 2 3/4″ Punch Point I-LAG™ Eye Lag Screw – Hundred Pack
The 150 PP is a punch point eye lag screw. It features a small drill point that tapers, making it suitable for both light and medium gauge sheet metal, specifically 20 gauge metal decking. The length from the point of the screw to the collar is about 1 1/2″, overall length is about 2 3/4″.… Continue reading 2 3/4″ Punch Point I-LAG™ Eye Lag Screw – Thousand Pack
The 150 SPC is a sharp point eye lag screw. It is designed to provide higher holding values in light gauge sheet metal than standard self drilling eye lag screws, specifically 20 and 22 gauge metal decking. The 150 SPC is also suitable in wood applications when the collar is needed. The length from the… Continue reading 2 3/4″ Sharp Point I-LAG™ Eye Lag Screw – Hundred Pack
The 150 SP is a sharp point eye lag screw. It is designed to provide higher holding values in light gauge sheet metal than standard self drilling eye lag screws, specifically 20 and 22 gauge metal decking. The 150 SP is also suitable in wood applications when the collar is needed. The length from the… Continue reading 2 3/4″ Sharp Point I-LAG™ Eye Lag Screw – Thousand Pack
The 225 SDC self drilling eye lag screw is designed to go through two or three layers of 5/8″ drywall and then into 16 to 22 gauge sheet metal. The 225 SDC is the only screw of its kind. Drill point to collar is about 2.5″, overall length is about 3.75″. Pair with a Lagmaster®… Continue reading 3 3/4″ Self Drilling I-LAG™ Eye Screw – Hundred Pack
The New ELDX – Deep Drilling Eye Lag Screw is designed to go into structural steel up to 1/4″ thick, NOT FOR USE IN SHEET METAL THINNER THAN 12 GAUGE (0.1094″). The ELDX has a blue Ruspert® finish with an extra wide drill tip. It can drill into 1/8″ steel in less than 5 seconds,… Continue reading 2 1/4″ Deep Drilling I-LAG™ Eye Lag Screw – Hundred Pack
The 750 SDW self drilling eye lag screw is designed to go directly into 16 to 22 gauge sheet metal. The 750 SDW is almost identical to the 750 SD. It features bright zinc plating instead of yellow zinc to distinguish between the two. Drill point to collar is about 3/4″, overall length is about… Continue reading 2″ Self Drilling I-LAG™ Eye Lag Screw – Thousand Pack – 750SDW
The 175 SDC self drilling eye lag screw is designed to go through one or two layers of 5/8″ drywall and then into 16 to 22 gauge sheet metal. The 175 SDC is the only screw of it’s kind with an ICC-ES listing. Drill point to collar is about 2″, overall length is about 3… Continue reading 3 1/4″ Self Drilling I-LAG™ Eye Lag Screw – Hundred Pack
The 175 SD self drilling eye lag screw is designed to go through one or two layers of 5/8″ drywall and then into 16 to 22 gauge sheet metal. The 175 SD is the only screw of it’s kind with an ICC-ES listing. Drill point to collar is about 2″, overall length is about 3… Continue reading 3 1/4″ Self Drilling I-LAG™ Eye Lag Screw – Thousand Pack
The 750 SDC self drilling eye lag screw is designed to go directly into 16 to 22 gauge sheet metal. The 750 SDC is the hundred pack version of the 750 SD. It is the only screw of it’s kind with an ICC-ES listing. Drill point to collar is about 3/4″, overall length is about… Continue reading 2″ Self Drilling I-LAG™ Eye Lag Screw – Hundred Pack
The 750 SD self drilling eye lag screw is designed to go directly into 16 to 22 gauge sheet metal. It is the only screw of it’s kind with an ICC-ES listing. Drill point to collar is about 3/4″, overall length is about 2″. Pair with a Lagmaster® Pole Tool to hang ceiling wire or… Continue reading 2″ Self Drilling I-LAG™ Eye Lag Screw – Thousand Pack – 750SD
1/8″ diameter, steel mandrel, white aluminum acoustical blind rivets with 1/4″ flange and 1/16″ – 1/8″ grip range. Bulk package of 10,000 pcs. UPC: 707129861054
1/8″ diameter, steel mandrel, black aluminum acoustical blind rivets with 1/4″ flange and 1/16″ – 1/8″ grip range. Sold in sturdy plastic bags. Package quantity is 100. UPC: 707129861795
1/8″ diameter, steel mandrel, white aluminum acoustical blind rivets with 1/4″ flange and 1/16″ – 1/8″ grip range. Sold in sturdy plastic bags. Package quantity is 1000. UPC: 707129861801
1/8″ diameter, steel mandrel, white aluminum acoustical blind rivets with 1/4″ flange and 1/16″ – 1/8″ grip range. Sold in sturdy plastic tubs. Package quantity is 500. UPC: 707129861030
1/8″ diameter, steel mandrel, white aluminum acoustical blind rivets with 1/4″ flange and 1/16″ – 1/8″ grip range. Sold in sturdy plastic bags. Package quantity is 100. UPC: 707129861078
The patented SGP™ Screw Gun Pole is the ultimate extension tool for overhead fastening applications. The universal saddle fits most screw guns with collated magazine attachments. The SGP™ is the most efficient and effective tool of its kind. Use it to install drywall or self-drilling screws safely from the ground. The SGP™ telescoping pole tool… Continue reading SGP Screw Gun Pole Tool
The LMP Viper Plug is a threaded adapter that allows you to attach a Viper 2, Viper 3 or Powers Sniper to the end of your Lagmaster Plus pole tool.
The open ended LMP 5/8 Plug is designed to install preassembled threaded rod using ITW’s Speedy fastener.
Vertigo tool extension to the Lagmaster® Plus extension pole.
Base extension to the Lagmaster® Plus extension pole.
Broom tool extension to the Lagmaster® Plus extension pole.
The LMP Keyless Chuck converts your Lagmaster® Plus Pole Tool into a ChuckExtender Pole Tool. Attach a drill bit, hole saw or nut driver with a quick twist of the keyless chuck.
LMP Pre-wrap extension to the Lagmaster® Plus extension pole.
Lagmaster Plus 1/4″ Hex Plug-in – Accepts all standard 1/4″ hex drivers
Wire Plug extension to the Lagmaster® Plus extension pole.
Lagmaster® Plus ½” Square Plug – 1/2″ male socket adapter – Accepts standard 1/2″ sockets.
Lagmaster® Plus 3/8” Plug – Open ended 3/8″ hex socket – Installs Elco screws pre-attached to 1/4″ or 3/8″ threaded rod
Lagmaster® Plus 9/16″ Plug – Open ended 9/16″ hex socket – For setting 3/8″ wedge anchors or concrete screws.
Lagmaster® Plus ½” National Pipe Thread Plug – Threaded adapter for Doc’s® HOIT-AL joist clip installation tool.
Lagmaster® Plus Purlin Plug – Hangs & wraps 12GA ceiling wire to “C” & “Z” Purlin/Joist clips.
Lagmaster® Plus Wire Plug – Welded version – Hangs & wraps 12GA ceiling wire attached to an I-LAG™ screw.
Wire bale pin for the Lagmaster extension pole.
Lagmaster® Viper Head – Threaded adapter for Viper 2, Viper 3 and Power’s Sniper.
Lagmaster® Driver – Small, replacement part for the Triple Lagmaster® extension pole. This is the bottom piece of the pole that that fits into the chuck of a power drill. Includes four screws. The large version fits three stage poles (LMG-12, LM-18, LM-24, LMGAP-12, LMAP-18, LMAP-24, LMGP-12, LMP-18, LMP-24).
Lagmaster® Head – Set Screw Version – Hangs & wraps 12GA ceiling wire, jack chain or braided wire attached to an I-LAG™ screw
1/4-28 x 3/8 Button Head Screws for LM & LMP Pole Tools – bag of four.
Lagmaster® Pre-Wrap Head (milled) – Installs I-LAG™ screws pre-tied to 12GA ceiling wire.
Lagmaster® Driver – Large, replacement part for the Triple Lagmaster® extension pole. This is the bottom piece of the pole that that fits into the chuck of a power drill. Includes four screws. The large version fits three stage poles (LMG-12, LM-18, LM-24, LMGAP-12, LMAP-18, LMAP-24, LMGP-12, LMP-18, LMP-24).
Lagmaster® Head – Welded version – Hangs & wraps 12GA ceiling wire attached to an I-LAG™ screw.
Replacement stud for Lagmaster Driver with hardware.
