The LS-350 Series Long Shooter Pole extends the reach of your powder actuated tool. Specifically designed to work with the following tools: Hilti® DX350 Hilti® DX35 Ramset® Cobra Ramset® Cobra+ (OLD VERSION) Simpson® PT-27 Simpson® PT-25S Powers™ PA351 Powers™ PA351A Powers™ P3500 Powers™ P3500A Powers™ P3600 Powers™ P35S Bluepoint™ BP301 DOES NOT WORK WITH… Continue reading LS-350 Series Long Shooter Pole
The HOKFMP is our most versatile hammer-on spring steel clip. It provides a solid mounting point for 1/4 x 20 or #10-24 threads and has two built in slots to accept most drive ring sizes. Compare to Caddy’s® 2FMP28!
The ODM-250 Halt Bit is specifically designed to drill holes into concrete for installation of 1/4″ eye wedge anchors. Drill the perfect depth every time! Pair with: Hilti’s Ceiling Anchor HHDCA 1/4″® Red Head’s 1/4″ x 2-1/8″ Tie Wire Wedge Anchor® UCAN’s Tie Wire Anchor® Powers’ Tie Wire SPIKE Anchor® Doc’s I-Pin Eye Wedge… Continue reading SDS Concrete Halt Bit
The ODM-375 Halt Bit is specifically designed to drill holes into concrete for installation of 3/8″ wedge anchors up to 4″ in length. Drill the perfect depth every time! Pair with: Hilti’s Kwik Bot® Red Head’s TruBolt® Power’s Power-Stud® Compare to Bosch’s SDS-plus® Stop Bit®, Relton’s Quick Stop® and Power’s Accu-Bits™. Packaged individually.
The I-Pin is a 1/4″ concrete expansion wedge anchor designed for use in suspended ceiling tension applications. It is an excellent choice when powder actuated pins are not practical. Such as fastening into very hard concrete with hard aggregate or in hospitals. A pre-drilled 1/4″ x 1 1/4″ hole is required for installation. Compare to:… Continue reading I-Pin – Tie Wire Anchor
Use the SDS PLUS I-Wedge Installation Tool to install I-Pins, Eye-Wedge Anchors and Powers’ Tie-Wire Spike Anchors using the “hammer only” feature of an SDS Plus hammer drill. Attaches to any SDS Plus Hammer Drill Weighs .40 lbs.
The TorqueExtender™ is a socket wrench extension pole. It allows you to torque down multiple sized fasteners to ceilings safely and easily from the ground. Installs 3/8″ wedge anchors, concrete screws and drop-in anchors with ease. Use what the inspectors use! Standard 1/2” male square socket drive with detent ball Standard 1/2” female square socket… Continue reading TorqueExtender
Use the I-Drill Driver to install I-Lag® screws into metal or wood surfaces with a power drill. Designed for use with Jacobs chuck style drills, not impact drills or drivers.
¼-20 x 4-1/4” Zinc Plated Acoustical Toggle Bolts Application: Acoustical Toggle Bolts are designed for indoor vertical tension applications only. The substrate strength will determine the allowable load. Instructions: Insert the Toggle Bolt through a ¾” hole in the substrate. The spring loaded wings will open once they are clear of the hole. Tighten the… Continue reading Toggle Bolts
The PurlinMaster™ is a multi-purpose pole tool used to install purlin clips and wrap ceiling wire all in one motion from the ground. The patented purlin head makes it possible to install a purlin clip and then wrap a ceiling wire onto the clip using the same tool. The PurlinMaster™ also includes an interchangeable head… Continue reading PurlinMaster™
